Raised 3D Helmet Stickers

• Durable 3D transfer stickers without a background
• Supplied individually with clear transfer film applied
• Very strong, permanent adhesive
• Scuff, peel and fade resistant
• Independently approved adhesive for use on safety helmets
• Excellent high-definition and vivid colours
• Available in any size or shape
• Virtually unlimited colour range

Application Instructions

To apply the stickers, first make sure that the surface you're applying to is clean.

Press down firmly on top of the entire sticker using a squeegee if you have one (or your fingers if you don't).

Slowly peel the top layer of clear film to lift the design and the clear film from the backing material together. If a small part of your design doesn't lift off the backing paper, lower the clear film back onto the backing paper, rub over the missing part of the design and try lifting it again.

When the entire design has been lifted, discard the backing paper and then very carefully place the sticker in position on your chosen surface.

Press down firmly across the entire design again, using a squeegee if you have one, then very slowly remove the clear film.

If a small part of your design lifts off the surface, lower the clear film slightly, rub over that part of the design firmly and try again.

Once the clear film has been completely removed, we recommend pressing down firmly across the entire design one more time to ensure it has been fully applied.